Areca ARC-1280ML Manual de usuario descargar pdf (Pagina 33)

HARDWARE INSTALLATION

LED Normal Status Problem Indication

Activity LED When the activity LED is illu-

minated, there is I/O activity

on that disk drive. When the

LED is dark, there is no activ-

ity on that disk drive.

N/A

Fault LED When the fault LED is solid

illuminated, there is no disk

present and When the fault

LED is off, that disk is pres-

ent and status is normal.

When the "Identify Drive" is

selected, the selected drive

fault LED will blank.

When the fault LED is slow blink-

ing (2 times/sec), that indicate

disk drive has failed and should be

hot-swapped immediately.

When the activity LED is illumi-

nated and fault LED is fast blinking

(10 times/sec) that indicate there

is rebuilding activity on the disk

drive.

B: Individual LED indicator connector

Connect the cables for the drive activity LEDs and fault LEDs be-

tween the backplane of the cage and the respective connector on

the SATA RAID controller. The following describes the fault/activity

LED.

Figure 2-26, ARC-

1110/1120/1210/1220

individual LED indica-

tors connector, for each

channel drive.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 180 181

Sin comentarios

Areca ARC-1280ML Manual de usuario Pagina 33